At this price it works as unthinkable.
Although it seems that there are many dusts in other comments, since it is recognized that all Drum brake is so, there is no problem.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
At this price it works as unthinkable.
Although it seems that there are many dusts in other comments, since it is recognized that all Drum brake is so, there is no problem.
Fits: YAMAHA XV250 Virago 91-93 B, D, E Rear Capacity:1 caliper, YAMAHA XV250 08-15 X, Y
I REALLY LOVE THIS VESRAH BRAKE SHOE SET. I HAVE BEEN USED THIS BRAKE SHOE SET FROM EARLY 2014 TO MID 2018 .Still 2.9mm left on the shoe.It has the ability ,very good stopping power especially in wet condition.Some say vesrah brake shoe exceed the OEM QUALITY. I can say that too .No need to worry about the quality ,Brake Shoe Doesn't wear very quickly because it's MADE IN JAPAN. Once I Put Vesrah Brake Shoe in, I can able to ride my bike with confident.vesrah brake shoe just a little bit pricey than OEM brake shoe kit. If I compare OEM vs VESRAH BRAKE SHOE , both products are excellent.I coudn't able to find vesrah brake shoe kit in mid 2018. So I put Brand New OEM SHOE KIT ON THE FRONT WHEEL. NOW WE ARE IN LATE 2022.Almost 20000 kms have been driven since putting new oem brake shoes.Two or three days ago I checked the front wheel brake shoes.I've noticed that the OEM brake shoe has worn approximately 1mm.When we replace a new brake shoe, the thickness of the shoe is approximately 4mm. With use, it gradually becomes less. In cases where the thickness of the brake shoe is 2mm or less, the brake shoe should be changed.Some riders complain about the brake shoe squeal & make noises when the brake lever pull in.This can happen due to not properly maintaining the brake hub and brake shoe.If the brake hub and shoe are checked and maintained well at least once every three to four months.it is possible to stop the wheels very easily & will eliminates any squealing noise..I love shopping at webike because they have everything I wanted.Price is so cheap than the other online shop.The package received in a good condition and nicely packed.Thanks For The High Quality Packaging.Nice Online Shopping Experience.Very Happy Coustomer .Highly Recommended.I found two stickers this time.has webike logo on the front ,says '' we love motorcycles and riders'' I'm gonna put that decals on my bike. Thank You So Much WEBIKE.View Detail
Fits: KAWASAKI Z400 82, KAWASAKI Z400 79-80, KAWASAKI Z400 78-79, KAWASAKI Z400 LTD 83, KAWASAKI Z250 LTD 83-87
I have w800. The back brake was worn out, so I took this opportunity to buy it. I think it was good to replace it because of its excellent braking power.View Detail
Fits: HONDA XL125S 85, HONDA XL125S 79-84, HONDA XL125R 82-85, HONDA XL125S 79-84, HONDA XL125R 82-85
The installed Brake Shoe was replaced because it was from that time.
It looks like it could be ordered by OEM, but Pad and Spring had to be ordered separately.
In Vesla, which is easily available for purchase.
There is a hang when inserting Spring, but it is not that difficult.View Detail
Fits: KAWASAKI Z400 82, KAWASAKI Z400 79-80, KAWASAKI Z400 78-79, KAWASAKI Z400 LTD 83, KAWASAKI Z250 LTD 83-87
I bought it used, and at the time of delivery, I had to replace the Rear brake because it was making a terrible noise as if it was pulling on the brake.
I used it at that time.
good point
The precision is so good that chamfering is not necessary.
Low cost.
High durability.
A bad point
Large is strange for people who are not used to working with it.View Detail
Fits: HONDA XL125S 85, HONDA XL125S 79-84, HONDA XL125R 82-85, HONDA XL125S 79-84, HONDA XL125R 82-85
CT110 HUNTER CUBOEMSpec. Vesrah ZV-VB126S. I thought that the groove of Brake Camshaft is a little narrower than OEM, so it is not easy to move if you put it on solidly. It works better than OEM and Touch is good! 。 I don't know about durability since it's only been a month.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING