2.64 USD
(400 JPY)
1.97 USD
(298 JPY)
(25% OFF)
4 (25 Reviews)
Very Good
It is strong for the price.Even if you fall down for low price Handlebar will not bend without bending. It is surprisingly strong. Expensive looks and CoolBar end cap are also good, but I think that this is enough considering falling. My son was present at the Minimoto race and it fell several times, but it is not yet a level to exchange. It is recommended.
Reviews For KIJIMA Bar End Cap Nylon From Other Webike User
Excellent
Surprisingly strong!With the Bar End installed, I crashed while riding on the circuit, but I think it depended on how I crashed, but the Bar End acted like a slider and the Handlebar did not bend and let the force go.View Detail
Average
Introduced to ZETA's Separate handle[How is it used?
I used it on my ZETA Pilot Handlebar. It was a perfect fit for the inside diameter.
How was your experience with it?
It will be knocked in with Hammer. It's just a Plastic piece, but it's cheap.
How did it compare to other products?
Compared to the Gold genus, it's cheaper and weighs less, so it doesn't feel as heavy on the Handlebar end.
I think that it becomes the Parts that can be recommended when riding in Circuit etc.
It also acts like a slider when you fall over, so I think it minimizes damage to the Handlebar.
[Points to note]
You have to hit it with Hammer to make it fit. If you hit it too hard, it will be deformed.View Detail
Excellent
From a practical standpoint, this is OK.It may be a matter of taste, but for me, this is good enough for both looks and practical use. It is the first place where Wound enters if it falls.
Installation is just a tap with a plastic hammer, but it's never come off, even when I've fallen.View Detail
Excellent
Temporary Bar EndI used this when I replaced the Handlebar in anticipation of installing the Hand guard.
The Hand guard will be available later in the budget, and if I only replace the Handlebar, the OEM will not have a Bar End and the hole will be exposed, so I bought it for temporary relief.
It's not something that will improve performance (vibration control, etc.), and for temporary purposes, I don't think there's anything better.View Detail
Average
I'm not complainingIt is used for the Handlebar End of CRF and Mini bike used in FlatDirt I am
I use it simply because it's cheap and it's so durable
As far as looks and such, I have nothing to comment on
Anyway, I recommend it for the practicality typeView Detail
Most Viewed Reviews Of KIJIMA Bar Ends
Excellent
Perfect fitThese were exactly what I was looking for. They match the ones that I saw in pictures on vintage AMA bikes. The fit is nice and tight. I know they're not going to fall out.View Detail
Excellent
Attach Bar end cap for Handlebar to Step end[How is it used?
I installed a footpeg from Other Brand Product, but the hole for the bolt was left open, so I was looking for something to cover the hole. It turned out to be 18mm, the same as the inside diameter of the handlebar, and I immediately bought this product.
Was the one you received as per Image?
The texture is like DURACON. GizaGiza has 4 with Stages on the part to insert into the hole, but it is also quite hard, so I was a little worried if I could really insert it into the hole.
Was the installation difficult?
Before installation, I sprayed silicon spray on the inside of the footpeg and the insertion point of the bar end cap to improve the sliding. At first, I tried to push it in by hand, but it was still impossible, so I ended up using a plastic hammer.
How was your experience with it?
It was all put together smoothly, as if it had always been like this. It seems to protect footpegBody somewhat even when it falls down.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang for installation:Hammer is a must for installation.View Detail
Excellent
Surprisingly strong!With the Bar End installed, I crashed while riding on the circuit, but I think it depended on how I crashed, but the Bar End acted like a slider and the Handlebar did not bend and let the force go.View Detail
Average
Introduced to ZETA's Separate handle[How is it used?
I used it on my ZETA Pilot Handlebar. It was a perfect fit for the inside diameter.
How was your experience with it?
It will be knocked in with Hammer. It's just a Plastic piece, but it's cheap.
How did it compare to other products?
Compared to the Gold genus, it's cheaper and weighs less, so it doesn't feel as heavy on the Handlebar end.
I think that it becomes the Parts that can be recommended when riding in Circuit etc.
It also acts like a slider when you fall over, so I think it minimizes damage to the Handlebar.
[Points to note]
You have to hit it with Hammer to make it fit. If you hit it too hard, it will be deformed.View Detail
Excellent
From a practical standpoint, this is OK.It may be a matter of taste, but for me, this is good enough for both looks and practical use. It is the first place where Wound enters if it falls.
Installation is just a tap with a plastic hammer, but it's never come off, even when I've fallen.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING