31.86 USD
(4,820 JPY)
30.38~ USD
(4,595 JPY)
(5% OFF)
4.2 (14 Reviews)
Excellent
Also looks and maintainability ◎R25, GSX250R Rear Sets are exchanged together when replacing.
Brake pedal Since you do not have to adjust the brake switch every time you adjust the position.
Adjustment is very hard to do because Normal brake switch is in the back. If Manufacturer also matches, it will not need adjustment work as soon as possible, so the installation location will be in a neglected position.
Because it is a Universal Product, even if Bolt pitch can not be inadvertently installed, it can be installed easily, but since the position of the MASTER such as Rear Sets changes, it is better to check the space to see if the Pressure switch itself interferes with Frame etc.. Since Switch interferes with Frame, I can not choose footpeg position adjustment of Rear Sets, so as not to fall down. Ring-like SW such as DRC is Recommendation if it is likely to interfere.
The SW does not enter in about as much as stepping on Pedal. I think that sensitivity will not be a problem because I will turn SW ON if I step on it until Brake is effective even a little.
Reviews For ACTIVE Pressure Switch Single From Other Webike User
Excellent
Used as a brake switch for Rear SetsWith the change to Rear Sets, the current Brake switch cannot be used in the same position Aluminum washer is also included and friendly Because the Harness from "Harness" is unacceptable as it is, it is necessary to use Protective Tube I put it through to the connector There are some cheap ones, but I selected the brand product this time in order to be at ease as much as possibleView Detail
Excellent
Purchased as KSR 110 for Rear Sets Rear masterI bought it as Switch of KSR 110 for Rear Sets Rear master..
Adjustment is necessary when Normal switch is Mechanical, but it is better to be able to do without adjustment.
Since MechanicalSwitch disappears and it gathers in Simple, I think that it looks good.
The problem is durability - - -.
I would like to see the situation of durability from now on.
View Detail
Most Viewed Reviews Of ACTIVE Hydraulic Brake Switch
Excellent
Used as a brake switch for Rear SetsWith the change to Rear Sets, the current Brake switch cannot be used in the same position Aluminum washer is also included and friendly Because the Harness from "Harness" is unacceptable as it is, it is necessary to use Protective Tube I put it through to the connector There are some cheap ones, but I selected the brand product this time in order to be at ease as much as possibleView Detail
Very Good
Performance as expected Expected durabilityI bought the Active one with high hopes because the one I was using before was ruined
The performance is exactly what I expected, it lights up at a good intensity when I step on the Brake The texture of the Stainless Steel is perfect Now I just need to look forward to the durability
The disappointment is that the Wiring is short as others have, so I extended it with a solder attachment The other point is that the base of Wiring is unreliable I reinforced it with a gun and Colgate Tube
Also, it's a matter of taste, but since the Wiring color is Red, depending on the color of the car, it may be noticeable that it is Black It was good If I'm being a little picky, I'd say that the Red of Wiring is a Plus and the Black of Wiring is a Plus There are a lot of Minus, and since the Brake switch is MinusControl, it is Black Isn't that enough? LOL!
Anyway, I'm looking forward to the durability So far, the other manufacturers have been failing every two years ( ´;p; ∀;p;) hmmm
View Detail
Excellent
Purchased as KSR 110 for Rear Sets Rear masterI bought it as Switch of KSR 110 for Rear Sets Rear master..
Adjustment is necessary when Normal switch is Mechanical, but it is better to be able to do without adjustment.
Since MechanicalSwitch disappears and it gathers in Simple, I think that it looks good.
The problem is durability - - -.
I would like to see the situation of durability from now on.
View Detail
Very Good
Caliper's Screw Mountain Length and other confirmation required.This time, due to change to FRANDORadial master cylinder, I purchased this item this time.
MASTER is FRANDOMaster cylinder 19 mm, Brake hose is GoodridgeQuantity : 2pc, Banjo is also Straightless Steel Type Straight banjo Quantity of Goodridge : 2pc vehicle Spec. It will be.
When temporarily assembling a hydraulic switch and other Banjo kind to Caliper before replacement, it is in a state not tightly closed tightly like the image.
I thought about cutting threads by about 5 mm, but because it is Stainless bolt, eventually Crash washer (copper
Washer) Originally Three Outside Quantity : Set of 2pcs. Even though it was in a state where securing of the hydraulic line was possible, we assembled it with a total of 5 pieces in each of the outer two pieces.
→ Please do not do it! ^ ^ ;;
Wiring of the Switch itself Red color Wiring is Quantity : Although 2 pc has come out, Switch operation, since it is simply ON ⇔ OFF, it can be used without problem even if it is connected to the vehicle.
Electro Tap for Wiring branch is also Quantity : 2pc. Set comes with, but when you branch off from the Wiring side, the bifurcation becomes thicker, but the car Both Sides was the same as the NISSIN 's Switch, a flat Small terminal, so also this flat tip terminal Small sized terminals were attached and flat type connections were made.
I also thought that the Lever operation would be slightly more responsive as a result of installing a hydraulic switch, but the area to receive the hydraulic pressure is also small, and the River STRIKE 750 in China is Street youth only, so especially the Large change does not change and hydraulic pressure Switch did not have any problem at all.
Banjo bolt will be long, so if you have a margin in the installation space, I think that it is a product you can recommend as it is easy to work with Bolt exchange only.
I think whether the goods themselves are convenient and good, but those who purchase are advised to purchase considering the thickness of the installation part of MASTER and the thickness due to the difference of Banjo's Manufacturer to use!View Detail
Average
Wiring polarity?In this time, with the introduction of the Back step, along with the Rear master cylinder exchange, it was necessary to exchange the TailLight switch from Mechanical to the hydraulic type, and purchased this product.
I think that making is good. However, the product of this hand has no good memory of durability. I will look at the progress from now.
When installing, Quantity of this product : Both 2 pc Cable are Red, and manuals are also not mentioned about polarity. If there is no polarity, I would like you to list it in the manual.
After all, there is only Cut & TRY.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING