Quality feels good, not flimsy at all. This will make removing stuck pistons much easier. The grip could be a little thicker but it's no problem. The gripping part is metal with a knurled surface (not rubber) so should grip on the piston quite well. It fits my TZR250 caliper pistons which are quite small, to give you an idea of the size.
Regularly clean and lubricate the Caliper piston and rub out a good BrakeTouch and it's a more frequent task than an Oil change I do this roughly once every 2,000k miles, but if I feel the Touch on the Brake is bad, I'll do it We do it regardless of the distance
This is my first time using this product
It was a bit slender in construction, but considering the price, I think it's reasonable
If you grip it tightly and grab the Piston, it will work as expected, so you can take it as an individual I think it's good enough for maintenance work
I'm going to use the Piston along with the push back tool, so if you're going to do it, get both this and the push back tool You need
The actual work is to get the Piston out, clean it, turn it, push it back, lubricate it, and repeat When you pull the brake lever (when you step on the brake pedal), the Piston is released We'll do it until they come out together
If the Piston is rusted, replace it or polish it and reuse it
If the Rubber Seal is deteriorating, the Piston will not return well Replace the rubber seal as well
The ability to perform subtle BrakeControl by the degree of crushing of the finger that pulls the brake lever It increases the fun you have while running your motorcycle
View Detail
Cleaned BrakeCaliper and used to rub out the Piston
It helped me to grill the poorly moving Piston
The texture is a bit cheap, but with Net sales, you don't know until the actual product arrives, so there's no choice
Each manufacturer has a similar product on the market and probably does as wellView Detail
I bought it to clean Brake Caliper.
But it is not used frequently. But without Piston's Reverse side being washable.
Just pinch Piston from behind and use it.
Easy to use.
I can do a little Wound inside Piston, but I do not care much.View Detail
Since Piston is fixed with GizaGiza, Wound is attached, but it can work efficiently.
Screw for fixing is not reliable, but there is no problem using it.
If possible, do not use this, either Lever or Compressor, so I'd like to get Piston.View Detail
PCX (JF56) I used it for Front pad replacement.
I wanted to wash Piston's Reverse side, so purchase.
It seems that durability can not be expected in terms of price, but for the time being rarely used
Since there is not, buy with the idea of ??OK if it is cheap.
I do not know because it is not compared with other companies, but I could use it normally.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING