Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Specification] Heat treatment: carburizing and nitriding treatment Durability: 10000 to 30000km (*)
*The stock size chain cannot be used on vehicles that are set up for conversion, and must be converted to the correct chain size. *The color and shape of the delivered product may differ from the picture. *If you change the number of sprockets from the stock, it may not be able to be installed on some models. *Durability is for reference only.It depends on your riding style, chain size and maintenance condition. *Offset figures are for sprockets only. *The actual offset of the chainline from the stock value will vary from model to model.Please note that if the stock sprocket has an offset, that value will be subtracted.(It depends on each model) *Not all of the available tooth numbers can be installed without interference to the vehicle body.Please confirm the installation of each vehicle body according to the number of teeth by yourself. *Not all sprockets have lightweight holes. *There may be changes in product specifications due to the manufacturer's reasons.
* The image is only for reference. The image shown may differ from the actual product.
The synergistic effect of high hardness by high level quenching and anti-corrosive treatment that does not deteriorate the material boasts excellent durability.When carburizing and nitriding heat treatment is applied to steel materials, it is very difficult to maintain high-precision dimensions because of the different expansion and contraction rates.Sunstar applies a special heat treatment process using its own facilities and technology.
Sprocket Course - Basics - Frequent maintenance is the secret to riding your bike for a long time!SUNSTAR
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I'm using it on my early GSR250 It's not in the compatibility chart, but if you install the front and back sides in the opposite direction, it won't interfere anywhere and the Chain It fits in nicely without offsetting and works fine Sprocket does not have a tooth count setting that allows the standard 14 to be increased, and XAM does not have a Catalogue I gave up and bought this one because the top was available but not forever in stock I bought it to reduce the RPMs at 100km cruising as I use it at high speed a lot I honestly can hardly see the Torque drop, Speedometer is a meter Due to the structure not being taken from the cable, there is no change in RPM on the meter, but the same The RPMs are noticeably lower when running at speed My calculations show that I can now cruise 100 km at about 7,000 rpm, so I have more room to cruise I could In general, the sense of acceleration is not usually at full throttle, so you can hardly see the change, but it's a good thing to have a high Because it was geared, the color of the Tourer became darker, and it became a characteristic that I like The GEAR ratio was changed, but the fuel consumption was not changed at all It's not a lot of money Parts, but it's a good thing that the characteristics have been tailored to my riding preferences I can clearly see it, so I am fully satisfied with it The manufacturer is also SUNSTAR, so I have a sense of securityView Detail
Mounting on GSX 250R. Cruise on highway became comfortable. Acceleration performance is somewhat lower, but it will also be pulled at low GEAR no problem.View Detail
From NORMAL to Front 1 - I changed it to Rear 2, and it was closing at high speed, but I was truly overkill or accelerate, so I exchanged Front to return to NORMAL Ding (Because NORMAL could not be used because of its lifetime) The acceleration became better than I thought, and I was made aware of the importance of SprocketSetting again. The Spec. I think that I will go on for a while.View Detail
The cheap Drive sprocket is cheaper than the OEM Parts Number, although the production prospect is not established, the delivery date is slightly higher than the lowest price, such as three months ahead of delivery or more! Besides, OEM Parts Number is not sure why, but with Rubber. This one is Refreshing feel like Design as well. Ride taste and so on are now.View Detail
About quality and textureExcellent productAbout the feeling of usesmooth running.quality is good.About shipping and packaginggood packaging and fast shippingView Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!