[Specification] ・Switch hole pre-machined ・Mirror finish on throttle part
[Product Description] ・Handlebar unit
[position data] Stock ratio position Height: 70mm up Full width: +30mm Aperture: 65mm forward
*This handlebar cannot be installed by itself. *Replacing the throttle holder, throttle cable, clutch hose and brake hose are required for replacing it. *When replacing the throttle cable, it is necessary to access the injector body.It is recommended that you entrust the replacement to a dealer who has expertise in this field. *The manufacturer's standard replacement time for a throttle cable replacement is 2.5 hours.Also, when replacing the brake hose, it is necessary to remove the hose from the ABS unit, and after replacing the hose, it is necessary to bleed the fluid.It is also necessary to bleed the fluid when replacing the clutch hose.Please note that you will need to prepare the fluid before replacement. *If you make a mistake in replacing the throttle cable or hose, the performance may be damaged and it may not be able to function properly, so please be very careful when replacing them.It is recommended that you entrust the replacement to a dealer who has expertise in this field.
"Adult Weekend".That's a good word for this handlebar.
There are two sides to DIAVEL. The sport cruiser aspect. It is equipped with the sport performance which is not imaginable from the category of cruiser. You can fully enjoy the cornering.
The other is the purely cruiser aspect. De Light has focused on this aspect. The posiion is 70mm taller than stock, giving you more room to ride. Adults who have outgrown "riding fast" are better suited to "riding with life" and taking it easy. It is relaxing.Handlebar that makes riders think of that is made.Let's try it.
[Comparison by installation]
Left side of image 4 is stock handlebar and right side is cruising handlebar. The difference is obvious when you compare them. This handlebar is 7cm taller than the stock one. (See "Position Data" for comparative values.)
[About installation] This handlebar cannot be installed by itself. The product is available as a handlebar only or as a full set that includes all the necessary parts for replacement. Approximate time for brake and clutch hose replacement is 1 hour. The entire exchange will take approximately 3.5 hours.(In some cases it will take more than that)
[combination]
The cruising steering bar is fitted with a step that moves the position slightly forward.For a more comfortable position, it is recommended to use this step kit. Please refer to STEP KIT (DEP147N).
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!