Spring Collar: yellow ■Cylinder construction: single tube ■Piston diameter: 36mm ■Piggyback reservoir tank ■Rebound damping force adjustment function: existence (at the present moment) ■Compression damping force adjustment function: existence (at the present moment) ■Riding height adjustment function is available Type Shape: S36PR1C1L
*Please check the various specifications carefully before purchasing. In addition, the text in the product description is for the representative model of the grade in question, so please check the specifications carefully again.
*When using a new suspension, the grease filled inside for assembly may adhere to the sliding parts and look like an oil leak, but there is no problem with the performance.
* The image is only for reference. The image shown may differ from the actual product.
[Key Features and Benefits of the Ohlins 4th Generation Legend Twin] ・Simple design with function intact ・Changed from hydraulic preload adjuster to screw type full adjustable ・Pressure side damping force adjustment is 4-wau, inherited from the full-adjustable type ・The main damping force adjustment, on the rebound side, is still the same 30-way adjustment ・Two spring colors, yellow and black, are available (except for some models)
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Honestly was expecting more from it, took it to a suspension shop to tune to my spec, is it worth 1400 Aud, approximately 300 Aud FeDex and about 300 Aud custom clearance? Maybe. Looks nice, I had a couple of good Ohlins shocks on my track bikes which offered more adjustment and when acceleration it is night and day difference, but the category of this bike is still a more naked/sport touring bike, maybe my mindset is wrong, rode about 200kms now, I have done: heavy, sharp, smooth acceleration, top speed, low speed, stoppies, some twisties, did not meet my performance level exception, but again, maybe Ohlins intentionally wants more comfort rather than performance? Great looking tho, texture and everything up to Ohlins standard, this is just a short term review, who knows, maybe the setting for currently is all wrong, might have to tune it again. Will write a long term experience later but currently that's how I feel.View Detail
Xe mình đi hơn 1 năm, vì đi nhiều nên phuộc khá là xuống cấp nên nghĩ kế hoạch thay mới. Cảm nhận về phuộc theo xe thì không được tốt, nhún cứng không êm khi đi 1 người.Sau khi gắn thì phuộc êm khi đi một người, qua gờ giảm tốc rất nhẹ nhàng.View Detail
I attempted to exchange it myself, but because I have only Side Stand, I can not Lift Rear. I asked for a replacement to the neighbors' shop and finished with cheap wages of 3,000 yen. I realized Lowdown by actually straddling. Running Small turning (Left fold) I will turn around like a soak on the road surface. RightCurve which is not good with this can lean safely and securely. From now on, I will enter Touring season but I'm looking forward to it. I saw OHLINS's Logo so proud!View Detail
Until now I used OEM KYB, but because I changed the Swingarm and it got high rigidity, I got rid of the thrust up badly in OEM and replaced it so I exchanged it. I had a hard time till setting out, but after setting out my favorite setting, I can feel the contact area of ??Tire with ass. It's as if it's still a limit. I feel like Motorcycle tells us to open more (Expression is junior high school student Level). Even in the place where the road surface is rough, Dumping performance is excellent, so it supple supple. The price is expensive, but I think that the cost effectiveness is high.View Detail
OEM Damper, Overhaul Because Oil leakage occurred a little over 1 year ago OHLINS decision to introduce. It will be Impression which took several pass at Touring after installation this time.
By the way, there are a lot of adjustment points, the same as the basic OEMDamper was adjusted to the numerical value.
However, since OEM can only adjust Pre-road, so that car height and sag will be similar to OEM Pre-road and total length were set. full length (The distance between the center of the upper and lower Screw holes) Is 325 mm, Pre-road is 58 mm By the way the car height is measured from the Helmet holder to the Shaft center of Rear tire I gave a number. As the setting of Others, the compression side : Return 2 from the fully closed position, extend side : From fully closed to 15 return I ran.
First I was running at a normal pace, surprised I was able to sense the small unevenness of the road surface. At the beginning, I have Shock which I regard as something ugly, but whatever it is I thought that it captures Small unevenness of the road surface. Perhaps I thought that it was communicating Shock with a small asperity.
After that, when I run at a reasonable pace, I feel that Tire is griping ~ I thought that it was being steadily transmitted. Somehow, I thought that I could do Van King with confidence.
Since I think that I can draw out more performance if I still issue a Set I would like to try various things.
Although the price is still high, I felt that the difference with OEMDamper is Large. It was good to purchase.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!